uniloy
Showing all 19 results
-
Uniloy Cooling Bed
Uniloy Cooling Bed
Uniloy Cooling Bed
Current number of lanes- 4
Width- 42 1/4” wide
Includes controls
Includes Dyco Automatic Pick and Place System with controls
Condition- Very good
Quick ViewUniloy Cooling Bed
Uniloy Cooling Bed
Current number of lanes- 4
Width- 42 1/4” wide
Includes controls
Includes Dyco Automatic Pick and Place System with controls
Condition- Very good
-
Molds to Make One Gallon Off-set Center Neck Finish Bottle
Molds to Make One Gallon Off-set Center Neck Finish Bottle
Molds to Make One Gallon Off-set Center Neck Finish Bottle
Model Number: 80459
10 available
Great Condition
Quick ViewMolds to Make One Gallon Off-set Center Neck Finish Bottle
Molds to Make One Gallon Off-set Center Neck Finish Bottle
Model Number: 80459
10 available
Great Condition
-
Uniloy Model IBS 45-3S Injection Blow Molding Machine
Uniloy Model IBS 45-3S Injection Blow Molding Machine
Uniloy Model IBS 45-3S Injection Blow Molding Machine
Please Review Link to View Additional Photos Below:
IBS45 Uniloy Italy May2019
Extruder L/D ratio- 17.3
Plastification rate- 98.3 pounds per hour
Maximum injection capacity- 5.3 ounces (150 grams)
Condition- Very good- the machine has low operating hours
Quick ViewUniloy Model IBS 45-3S Injection Blow Molding Machine
Uniloy Model IBS 45-3S Injection Blow Molding Machine
Please Review Link to View Additional Photos Below:
IBS45 Uniloy Italy May2019
Extruder L/D ratio- 17.3
Plastification rate- 98.3 pounds per hour
Maximum injection capacity- 5.3 ounces (150 grams)
Condition- Very good- the machine has low operating hours
-
Uniloy Model 400 R20 Reciprocating Screw Blow Molding Machine
Add to cartQuick View -
Uniloy Milacron Model HSM 10/D Continuous Extrusion Blow Molding Machine
Uniloy Milacron Model HSM 10/D Continuous Extrusion Blow Molding Machine
– Head configuration- dual parison head with 300 mm distance between centers of die heads
– Maximum die diameter- 140 mm
– Press configuration- dual clamp
Quick ViewUniloy Milacron Model HSM 10/D Continuous Extrusion Blow Molding Machine
– Head configuration- dual parison head with 300 mm distance between centers of die heads
– Maximum die diameter- 140 mm
– Press configuration- dual clamp
-
Uniloy Model 350 R3 (6) Head Blow Molding Machine
Uniloy Model 350 R3 (6) Head Blow Molding Machine
In Operation
Well Maintained
Immediately Available
Quick ViewUniloy Model 350 R3 (6) Head Blow Molding Machine
In Operation
Well Maintained
Immediately Available
-
Uniloy Model 2010 (2) Head Blow Molding Machine
Add to cartQuick View -
Uniloy Model 10042 Trimming Machine
Add to cartQuick View -
Uniloy Model 10039 Trimming Machine
Add to cartQuick View -
Uniloy Model 350 R2 (6) Head Reciprocating Screw Blow Molding Machine
Add to cartQuick View -
Uniloy Model 350 R2 (8) Head Blow Molding Machine
Add to cartQuick View -
2012 PBM Model 12DL (2) Head Reciprocating Screw Blow Molding Machine
2012 PBM Model 12DL (2) Head Reciprocating Screw Blow Molding Machine
2 head blow molding machine
Gallon machine
Quick View2012 PBM Model 12DL (2) Head Reciprocating Screw Blow Molding Machine
2 head blow molding machine
Gallon machine
-
Uniloy Model 2011 (3) Head Blow Molding Machine
Uniloy Model 2011 (3) Head Blow Molding Machine
Uniloy Model 2011 (3) Head Blow Molding Machine
Machine was completely rebuilt in 2014 including the following:
New Automation Direct Click Koyo PLC
Dura Pulse variable frequency drive
New Uniloy built control panel
New swing arms
New extruder drive motor
New air cooled barrel system
Offer includes the following:
Spin trimming machine
Hopper/loader
Condition- Excellent, rebuilt
Quick ViewUniloy Model 2011 (3) Head Blow Molding Machine
Uniloy Model 2011 (3) Head Blow Molding Machine
Machine was completely rebuilt in 2014 including the following:
New Automation Direct Click Koyo PLC
Dura Pulse variable frequency drive
New Uniloy built control panel
New swing arms
New extruder drive motor
New air cooled barrel system
Offer includes the following:
Spin trimming machine
Hopper/loader
Condition- Excellent, rebuilt
-
Uniloy Model UR-100 Reciprocating Screw Blow Molding Machine
Uniloy Model UR-100 Reciprocating Screw Blow Molding Machine
The machine is currently set up to run (2) bottles per head, arranged neck to neck, so that 24 bottles are produced each cycle.
The offer can includes (2) 24 cavity molds (neck to neck) to produce an 8 ounce (approximately 250 ml) and a 16 ounce (approximately 500 ml) drinkable yogurt bottle
There is another mold available as well.
It has a system to separate the neck of one bottle from the other and a rotary trimmer to finish trimming the bottle so that it emerges ready to fill.
Video Below is of Similar Machine In Operation
Quick ViewUniloy Model UR-100 Reciprocating Screw Blow Molding Machine
The machine is currently set up to run (2) bottles per head, arranged neck to neck, so that 24 bottles are produced each cycle.
The offer can includes (2) 24 cavity molds (neck to neck) to produce an 8 ounce (approximately 250 ml) and a 16 ounce (approximately 500 ml) drinkable yogurt bottle
There is another mold available as well.
It has a system to separate the neck of one bottle from the other and a rotary trimmer to finish trimming the bottle so that it emerges ready to fill.
Video Below is of Similar Machine In Operation
-
2002 Uniloy Model R-2000 (3) Head Reciprocating Screw Blow Molding Machine
2002 Uniloy Model R-2000 (3) Head Reciprocating Screw Blow Molding Machine
3 heads with 16” center to center distances between heads
Side shift capability to make bottles with an offset center neck finish
Includes Uniloy Model 10041 trimming machine with Siemens Model S7-200 PLC (
(3) Uniloy Model 90254 (2 1/2) gallon molds
Quick View2002 Uniloy Model R-2000 (3) Head Reciprocating Screw Blow Molding Machine
3 heads with 16” center to center distances between heads
Side shift capability to make bottles with an offset center neck finish
Includes Uniloy Model 10041 trimming machine with Siemens Model S7-200 PLC (
(3) Uniloy Model 90254 (2 1/2) gallon molds
-
2002 Uniloy Model R2000 (4) Head Reciprocating Screw Blow Molding Machine
2002 Uniloy Model R2000 (4) Head Reciprocating Screw Blow Molding Machine
Low Operating Hours
(4) Head on 12″ Centers
Side Shift Capability to run an F- Style Bottle
Includes Uniloy Model 10042 Dual Index Trimmer
Can be Inspected Dry Cycling
Quick View2002 Uniloy Model R2000 (4) Head Reciprocating Screw Blow Molding Machine
Low Operating Hours
(4) Head on 12″ Centers
Side Shift Capability to run an F- Style Bottle
Includes Uniloy Model 10042 Dual Index Trimmer
Can be Inspected Dry Cycling
-
Uniloy Model 350 R4 (5) Head Reciprocating Screw Blow Molding Machine
Uniloy Model 350 R4 (5) Head Reciprocating Screw Blow Molding Machine
Complete Line
– Includes Side Shift and Parison Programming
Quick ViewUniloy Model 350 R4 (5) Head Reciprocating Screw Blow Molding Machine
Complete Line
– Includes Side Shift and Parison Programming
-
Uniloy Model 350 R2 (4) Head Reciprocating Screw Blow Molding Machine
Uniloy Model 350 R2 (4) Head Reciprocating Screw Blow Molding Machine
Complete Line- Refurbished in 2011
Perfect for producing 1 Gallon Water, Dairy, Juice, Industrial Round Bottles, and Smaller Containers
Quick ViewUniloy Model 350 R2 (4) Head Reciprocating Screw Blow Molding Machine
Complete Line- Refurbished in 2011
Perfect for producing 1 Gallon Water, Dairy, Juice, Industrial Round Bottles, and Smaller Containers
-
Uniloy 4 Lane Cooling Beds
Add to cartQuick View