Showing 1–32 of 41 results
-
2002 Sidel Model SBO 4 PET Reheat Stretch Blow Molding Machine
Add to cart2002 Sidel Model SBO 4 PET Reheat Stretch Blow Molding Machine
Sidel Model SBO 4 PET Reheat Stretch Blow Molding Machine
Date of manufacture- 2002
Series 2 machine
Number of cavities- 4
Maximum production rate- approximately 6,000 bottles per hour
Maximum bottle size- 2 liters
Oven type- linear
Type mold hangers- GUPM
Offer includes the following:
Change parts for 28-410 mm neck finish diameter
Preform hopper
Perform elevator
Perform orienter
Preform feed rails
Condition- Used- machine is still installed and in operation
-
2002 Sidel Model SBO 4-WP (4) Cavity PET Re-heat Stretch Blow Molding Machine
Add to cart2002 Sidel Model SBO 4-WP (4) Cavity PET Re-heat Stretch Blow Molding Machine
Year of manufacture- 2002
Series 2 machine
Number of cavities- 4
Maximum speed- approximately 6,000 bottles per
Maximum container size- 2 liters
Oven type- linear
Machine has preferential heating capability to run oval/flat bottles
Condition- Very good
-
2003 Sidel Model SBO 20 PET Stretch Blow Molding Machine
Add to cart2003 Sidel Model SBO 20 PET Stretch Blow Molding Machine
2003 Sidel Model SBO 20 PET Stretch Blow Molding Machine
Series II machine
Number of cavities- 20
Nominal capacity of machine- 30,000 per hour (1,500 per hour per cavity)
Condition- Good, Sidel Inspection Report Available upon Request
-
2008 Sidel Model SBO 34 Universal PET Reheat Stretch Blow Molding Machine
Add to cart2008 Sidel Model SBO 34 Universal PET Reheat Stretch Blow Molding Machine
2008 Sidel Model SBO 34 Universal PET Reheat Stretch Blow Molding Machine
– Offer includes the following equipment features:
– Preform dumper
– Preform hopper/elevator
– Preform orienter
– Preform indeed rails
– Condition- Very good- can be inspected in operation
-
2012 Sidel Model SBO 18 Universal/Matrix PET Reheat Stretch Blow Molding Machine
Add to cart2012 Sidel Model SBO 18 Universal/Matrix PET Reheat Stretch Blow Molding Machine
2012 Sidel Model SBO 18 Universal/Matrix PET Reheat Stretch Blow Molding Machine
Offer includes the following equipment/features:
Perform dumper
Preform hopper/elevator
Preform orienter
Preform in feed rails
Excellent Condition! – Very low operating hours (less than 15,000)
Well maintained – Can be inspected in Operation
-
ADS Model G62C13 PET Reheat Stretch Blow Molding Machine
Add to cartADS Model G62C13 PET Reheat Stretch Blow Molding Machine
ADS Model G62C13 PET Reheat Stretch Blow Molding Machine
Year of manufacture- 2004
Serial number- 62297
Number of cavities- 2
Distance between mold centers- 120 mm
Maximum bottles per hour- 3,200
Maximum bottle height 350 mm
Maximum bottle diameter- 105 mm
Range of bottle capacity- 0.2 liters to 2.5 liters
Machine currently is set up to run bottle with a 38 mm neck finish
Number of heating modules inwoven- 3
Offer includes the following:
Preform hopper/elevator
Preform orienter
Preform feed rails
Some spare parts
Condition- Used, well maintained, was decommissioned in good operating condition and is supported by 1 BLOW technicians for spare parts and installation
-
ADS Model G63 PET Reheat Stretch Blow Molding Machine
Add to cartADS Model G63 PET Reheat Stretch Blow Molding Machine
ADS Model G63 PET Reheat Stretch Blow Molding Machine
Year of manufacture- 2005
Number of cavities- 3
Type machine- linear
Approximate number of operating hours- 10,000
Operating speed- approximately 2,500 per hour
Offer includes the following:
Preform dumper
Preform hopper
Preform elevator
Preform orienter
Preform feed rails
Set of 4 liter rectangular molds
Water cooled chiller
Condition- Very good- can be inspected dry cycling
-
Complete PET Bottle Blowing, Filling, and Packing Line for Water
Add to cartComplete PET Bottle Blowing, Filling, and Packing Line for Water
Complete PET Bottle Blowing, Filling, and Packing Line for Water
2007 Krones Model Contiform S24 PET Reheat Stretch Blow Molding Machine with all preform handling equipment
note- machine has approximately 78,000 operating hours
Line rated at 720 bottles per minute
Lanfranchi hopper/bottle unscrambler
Descon airveypr
Empty bottle conveyor
Krones volumetric filling machine
Krones rotary capping machine
Krones Model Canamatic Labeling Machine
Krones Model Checkmat Inspection System
Filled Bottle Conveyor
Videojet bottle decoder
Douglas Model M75 Contour Packer
Pack/case conveyor
Tyson Sprial Conveyor
Production Automation Incorporated Pack/case palletizer
Pallet conveyor
Wulftec Model WCRT-200 Stretch Wrapping Machine
Pallet conveyor
Condition- Used, equipment can be inspected in operation- well maintained
-
FlexBlow Model FB2 PET Reheat Stretch Blow Molding Machine
Add to cartFlexBlow Model FB2 PET Reheat Stretch Blow Molding Machine
Year 2017
Number of cavities 2
Maximum output up to 2600 bottle per hour
Mold pitch 160 mm
Capable of producing up to a 6 liter bottle
Oven type Quick change
Mold change over time 10 min
Individual adjustable heating zones units 3
Oven pitch 63 5 mm
Lamp pitch 18 mm
Number of mandrels 52 units
Number of lamps vertically 9 units
Additional features
Preferential heating for oval containers
Integrated burst detection
Automatic PET preform box dumper with safety guards
Jam free conventional preform unscrambling system
Soft close system
Table top conveyor takeout
Condition very good can be inspected in operation -
Krones (8) Cavity PET Reheat Stretch Blow Molding Machine
Add to cartKrones (8) Cavity PET Reheat Stretch Blow Molding Machine
Number of cavities- 8Year of manufacture- 2014Equipped with change parts for a 28 mm neck finishProduction rate- machine was running approximately 16,400 bottles per hourCondition- Very good- low operating hours -
Krones Model Contiform S20 PET Re-heat Stretch Blow Molding Machine
Add to cartKrones Model Contiform S20 PET Re-heat Stretch Blow Molding Machine
Well Maintained
Oven upgraded to C3 design
Half- liter molds available with machine purchase
-
Krupp Corpoplast Model Blomax 6 PET Reheat Stretch Blow Molding Machine
Add to cartKrupp Corpoplast Model Blomax 6 PET Reheat Stretch Blow Molding Machine
Krupp Corpoplast Model Blomax 6 PET Reheat Stretch Blow Molding Machine
Year of manufacture- 1998
Operating speed- approximately 12,000 per hour
Offer includes the following:
Preform dumper
Preform hopper
Preform elevator
Preform orienter
Preform feed rails
Set of 1.5 liter molds
Condition- Good- can be inspected dry cycling
-
Siapi Model EA7/4 PET Reheat Stretch Blow Molding Machine with Molds Complete Line
Add to cartSiapi Model EA7/4 PET Reheat Stretch Blow Molding Machine with Molds Complete Line
Siapi Model EA7/4 PET Reheat Stretch Blow Molding Machine with Molds (complete line to produce (1) gallon bottles with handle)
– Year of construction- 2011
– Upstream and downstream Equipment
– Number of cavities- 4
– Nominal production rate- 70 bottles per minute/4,200 bottles per hour
– Machine was running a (1) gallon bottle
– Condition- Very good- well maintained
-
Siapi Model EASP20.200 PET Two Step Stretch Blow Molding Machine
Add to cartSiapi Model EASP20.200 PET Two Step Stretch Blow Molding Machine
Well Maintained
Currently Set up to Run 1- Gallon Square Bottle with 43mm neck finish
Includes Preform Handling Equipment
Molds Available with Purchase of the Machine
-
Sidel Model Combi BD EvoBLOW SBO 18 Matrix PET Reheat Stretch Blow Molding Machine and Sidel EVODECO Labeling Machine
Add to cartSidel Model Combi BD EvoBLOW SBO 18 Matrix PET Reheat Stretch Blow Molding Machine and Sidel EVODECO Labeling Machine
Sidel Model Combi BD EvoBLOW SBO 18 Matrix PET Reheat Stretch Blow Molding Machine and Sidel EVODECO Labeling Machine
-
Sidel Model EVODECO 27T/1 R 1080 RF 126 Labeling Machine
Add to cartSidel Model EVODECO 27T/1 R 1080 RF 126 Labeling Machine
Sidel Model EVODECO 27T/1 R 1080 RF 126 Labeling Machine
Year of manufacture- 2019
Type labeler- wrap around roll fed
Label material- plastic or paper
Nominal production speed- 42,000 per hour
Number of heads- 27
Carousel diameter- 1080 mm
Pitch- 125 mm
Machine includes the following:
– Bottle pressurizing system
– Automatic regulation of machine speed according to line conditions
– Fume extractor
– Laser coder
NOTE: Labeler is currently part of a Combi BlowDeco system to blow and label PET bottles
Condition- Like New- lightly used
-
Sidel Model SBO 10 PET Stretch Blow Molding Machine
Add to cartSidel Model SBO 10 PET Stretch Blow Molding Machine
– Series I machine
– Number of cavities- 10
– Capable of producing up to a 3-liter bottle
– Nominal production capacity- 12,000 bottles per hour
-
Sidel Model SBO 10 PET Stretch Blow Molding Machine
Add to cartSidel Model SBO 10 PET Stretch Blow Molding Machine
Sidel Model SBO 10 PET Stretch Blow Molding Machine
– year 2002
– Series 2 version
– Number of cavities- 10
– Production capacity- maximum nominal output- 15,000 bottles per hour
– Type mold hangers- GUPM
– Preform external neck diameter- maximum- 43 m.m.
– Preform support ring diameter- maximum- 48.5 m.m.
– Preform length including neck- maximum- 185 m.m.
– Bottle diameter- maximum- 130 m.m.
– Bottle height- maximum- 380 m.m.
– Bottle capacity- maximum- 2.25 liters
– Condition- Very good- low operating hours- currently installed as an R&D/Training machine- can be inspected in storage
-
Sidel Model SBO 14 PET Reheat Stretch Blow Molding Machine
Add to cartSidel Model SBO 14 PET Reheat Stretch Blow Molding Machine
Series Two Plus
In Operation and Well Maintained
Immediatiatley Available
-
Sidel Model SBO 2/3 PET Reheat Stretch Blow Molding Machine
Add to cartSidel Model SBO 2/3 PET Reheat Stretch Blow Molding Machine
Year of manufacture- 2000Number of cavities- 2Nominal production capacity- 2,400 bottles per hourOffer includes the following:Preform dumberPreform hopper/elevatorPreform orienterPreform feed railsTransformerCondition- Good- operated until approximately November 2022 -
Sidel Model SBO 20 Universal PET Reheat Stretch Blow Molding Machine
Read moreSidel Model SBO 20 Universal PET Reheat Stretch Blow Molding Machine
Sidel Model SBO 20 Universal PET Reheat Stretch Blow Molding Machine
– Year- 2006
– Number of cavities- 20
-
Sidel Model SBO 2F PET Reheat Stretch Blow Molding Machine
Add to cartSidel Model SBO 2F PET Reheat Stretch Blow Molding Machine
Year of manufacture- 2000
Number of cavities- 2
Nominal production capacity- 2,400 bottles per hour
Type mold hangers- GUPM
Offer includes the following:
Preform dumber
Preform hopper/elevator
Preform orienter
Preform feed rails
Transformer
Condition- Good- operated until approximately November 2022
-
Sidel Model SBO 6/10 PET Stretch Blow Molding Machine
Read moreSidel Model SBO 6/10 PET Stretch Blow Molding Machine
SBO 6/10 (6 cavities and 10 heating sections)
Two-step blow molding process. This entails a preform being injection molded. The preform is then blown and stretched to specifications.
The Machine is in very good condition.
-
Sidel Model SBO 6/6 PET Reheat Stretch Blow Molding Machine
Add to cartSidel Model SBO 6/6 PET Reheat Stretch Blow Molding Machine
Sidel Model SBO 6/6 PET Reheat Stretch Blow Molding Machine
Year of manufacture- 1996
Number of cavities- 6
Production capacity- approximately 7200 bottles per hour (depending on size and design of bottle)
Type mold hanger- GUPM
Oven type- linear
Maximum bottle diameter- 120 m.m.
Maximum bottle height- 388 m.m.
Maximum neck ring diameter- 51 mm
Maximum internal neck diameter- 34 mm
Maximum preform length- 210 m.m
Number of preforms in oven- 116
– Offer includes the following:
– Preform dumper
– Preform hopper/elevator
– Preform orienter
– Preform feed rails
– Condition- Good, can be inspected in operation in Florida
-
Sidel Model SBO 8 CHP (Universal) PET Reheat Stretch Blow Molding Machine
Add to cartSidel Model SBO 8 CHP (Universal) PET Reheat Stretch Blow Molding Machine
Well maintained, low operating hours
Upgrades
Preferential Heating
-
Sidel Model SBO4R6 PET Reheat Stretch Blow Molding Machine
Add to cartSidel Model SBO4R6 PET Reheat Stretch Blow Molding Machine
Sidel Model SBO4R6 PET Reheat Stretch Blow Molding Machine
Year of manufacture- 1993
Serial number- 184
Number of cavities- 4
Current production- (1) gallon bottles- approximately 1.775 bottles per hour (the smaller the bottle the greater the speed.)
Type of mold hanger- SUPM (this machine is equipped with large mold hangers and can produce a (1) gallon/4 liter bottle or larger
Oven type- Linear
Offer includes the following:
Preform dumper
Preform hopper/elevator
Preform orienter
Preform feed rails
Condition- good recently in operation, in place at the plant
