Nissei ASB Model 650NHII PET Stretch Blow Molding Machine
Nissei ASB Model 650NHII PET Stretch Blow Molding Machine
Very good condition
Well maintained
Offer Includes the following:
O’Connell Machine bottle take out system
Una-Dyn 1200 Pound insulated hopper
Una-Dyn Model DHD-6 GF Material Dryer
Sterlco Thermolator
Related products
-
Uniloy Model UR-100 Reciprocating Screw Blow Molding Machine
Add to cartUniloy Model UR-100 Reciprocating Screw Blow Molding Machine
The machine is currently set up to run (2) bottles per head, arranged neck to neck, so that 24 bottles are produced each cycle.
The offer can includes (2) 24 cavity molds (neck to neck) to produce an 8 ounce (approximately 250 ml) and a 16 ounce (approximately 500 ml) drinkable yogurt bottle
There is another mold available as well.
It has a system to separate the neck of one bottle from the other and a rotary trimmer to finish trimming the bottle so that it emerges ready to fill.
Video Below is of Similar Machine In Operation
-
Uniloy Model 350 R4 (5) Head Reciprocating Screw Blow Molding Machine
Add to cartUniloy Model 350 R4 (5) Head Reciprocating Screw Blow Molding Machine
Uniloy Model 350 R4 (5) Head Reciprocating Screw Blow Molding Machine (Complete Line)
Serial number- 4085
Machine has side shift capability that enables the
machine to produce off set center neck finishes
Head configuration- 5 heads with 8” center to center
distances between heads
Heads are programmable
Extruder size- 3 1/2 “
Extruder motor horse power- 125
Shot size- nominal 1600 grams
Clamp dimensions- 48” wide x 21 3/4” highMachine has been upgraded as follows:
– Air cooled barrel installed
– G.E. Model AF-300E$ AC variable frequency drive installed
– New Instrucon Model Maco Compact PLC installed
– One new program cylinder installed
– Hydraulic hoses changed
– New open/close valve installed
– All clamp bearings changed
– New PLC installed on Cooling Bed
– New Allen Bradley MicroLogix PLC installed on Trimming Machine
– New Plastech Leak Detector installed on Trimming Machine
– Line includes the following:
– Uniloy Cooling Bed
– Uniloy Model 10042 Trimming Machine
Controls- New Instrucon Model Maco Compact PLC
Condition- Very good- equipment can be inspected dry cycling -
1989 Bekum Model BM-303D Dual Sided Continuous Extrusion Blow Molding Machine
Add to cart1989 Bekum Model BM-303D Dual Sided Continuous Extrusion Blow Molding Machine
PRICE REDUCTION
This machine can produce a trimmed, oriented and ready to fill bottle
Includes (2) Sets of (3) Cavity Molds to produce 15 ounce square bottle
BM-303 data sheets