Showing all 31 results
-
2002 Sidel Model SBO 4-WP (4) Cavity PET Re-heat Stretch Blow Molding Machine
Add to cart2002 Sidel Model SBO 4-WP (4) Cavity PET Re-heat Stretch Blow Molding Machine
Year of manufacture- 2002
Series 2 machine
Number of cavities- 4
Maximum speed- approximately 6,000 bottles per
Maximum container size- 2 liters
Oven type- linear
Machine has preferential heating capability to run oval/flat bottles
Condition- Very good
-
2003 Sidel Model SBO 20 PET Stretch Blow Molding Machine
Add to cart2003 Sidel Model SBO 20 PET Stretch Blow Molding Machine
2003 Sidel Model SBO 20 PET Stretch Blow Molding Machine
Series II machine
Number of cavities- 20
Nominal capacity of machine- 30,000 per hour (1,500 per hour per cavity)
Condition- Good, Sidel Inspection Report Available upon Request
-
ADS Model G63 PET Reheat Stretch Blow Molding Machine
Add to cartADS Model G63 PET Reheat Stretch Blow Molding Machine
ADS Model G63 PET Reheat Stretch Blow Molding Machine
Year of manufacture- 2005
Number of cavities- 3
Type machine- linear
Approximate number of operating hours- 10,000
Operating speed- approximately 2,500 per hour
Offer includes the following:
Preform dumper
Preform hopper
Preform elevator
Preform orienter
Preform feed rails
Set of 4 liter rectangular molds
Water cooled chiller
Condition- Very good- can be inspected dry cycling
-
Aoki Model SBIII-500N-60 PET Injection Stretch Blow Molding Machine
Add to cartAoki Model SBIII-500N-60 PET Injection Stretch Blow Molding Machine
Aoki Model SBIII-500N-60 PET Injection Stretch Blow Molding Machine
– (2) available
– Year of manufacture- 2003
– Offer can include a series of injection (preform) molds and several blow molds at an attractive additional price
– Condition- Very good- taken out of production in approximately October 2020
-
Bekum Model BM-406D Continuous Extrusion Blow Molding Machine
Add to cartBekum Model BM-406D Continuous Extrusion Blow Molding Machine
Bekum Model BM-406D Continuous Extrusion Blow Molding Machine
Year of manufacture- 2006
Line was reported to have averaged approximately 11,250 bottles per hour
Head specifications- 6 parison head with 70 mm distances between die centers
Extruder diameter- 100 mm
Mold width- 500 mm
Mold length- 470 mm
Mold depth- 2 x 130 mm
Daylight opening- 250 mm
Clamp force- 15.7 tons
Electrical specifications- 460 volts/3 phase/60 Hz
Offer includes the following:
– (2) sets of 12 cavity molds that make 8 ounce dairy bottles (each cavity produces 2 bottles)
– Air reservoir tank
– (2) Sentra Thermolators
-Pace Model M410 Bottle Orienter
– Spare parts
Controller- Barber Colman Model DS8C-00B0-E00-Z-00 PLC
Condition- Very good
-
Bekum Model BM-806D Continuous Extrusion Blow Molding Machine
Add to cartBekum Model BM-806D Continuous Extrusion Blow Molding Machine
2008 Bekum Model BM-806D Blow molding Machine– Bottle wall configuration- Mono layer– Extruder configuration- Single extruder– Extruder diameter- 100 mm– Head configuration- Five parison head with 150 mm distance between head centers– Condition- Very good- machine is still under power and can be inspected dry cycling -
Bekum Model H-201 Continuous Extrusion Blow Molding Machine
Add to cartBekum Model H-201 Continuous Extrusion Blow Molding Machine
Year of manufacture- 1975
Press arrangement- dual sided machine
Extruder diameter- 90 mm
No head available
Condition- Fair to good
-
Krones Model Contiform S20 PET Re-heat Stretch Blow Molding Machine
Add to cartKrones Model Contiform S20 PET Re-heat Stretch Blow Molding Machine
Well Maintained
Oven upgraded to C3 design
Half- liter molds available with machine purchase
-
Magic Model VF 146/8 PET Injection Stretch Blow Molding Machine
Add to cartMagic Model VF 146/8 PET Injection Stretch Blow Molding Machine
– Screw diameter- 54 mm
– Injection capacity- 354 cc
– Type controller- Gefran
-
Siapi Model EA7/4 PET Reheat Stretch Blow Molding Machine with Molds Complete Line
Add to cartSiapi Model EA7/4 PET Reheat Stretch Blow Molding Machine with Molds Complete Line
Siapi Model EA7/4 PET Reheat Stretch Blow Molding Machine with Molds (complete line to produce (1) gallon bottles with handle)
– Year of construction- 2011
– Upstream and downstream Equipment
– Number of cavities- 4
– Nominal production rate- 70 bottles per minute/4,200 bottles per hour
– Machine was running a (1) gallon bottle
– Condition- Very good- well maintained
-
Sidel Model SBO 2/3 PET Reheat Stretch Blow Molding Machine
Add to cartSidel Model SBO 2/3 PET Reheat Stretch Blow Molding Machine
Year of manufacture- 2000Number of cavities- 2Nominal production capacity- 2,400 bottles per hourOffer includes the following:Preform dumberPreform hopper/elevatorPreform orienterPreform feed railsTransformerCondition- Good- operated until approximately November 2022 -
Sidel Model SBO 2F PET Reheat Stretch Blow Molding Machine
Add to cartSidel Model SBO 2F PET Reheat Stretch Blow Molding Machine
Year of manufacture- 2000
Number of cavities- 2
Nominal production capacity- 2,400 bottles per hour
Type mold hangers- GUPM
Offer includes the following:
Preform dumber
Preform hopper/elevator
Preform orienter
Preform feed rails
Transformer
Condition- Good- operated until approximately November 2022
-
SIG Corpoplast Model Blowmax 12 PET Reheat Stretch Blow Molding Machine
Add to cartSIG Corpoplast Model Blowmax 12 PET Reheat Stretch Blow Molding Machine
SIG Corpoplast Model Blowmax 12 PET Reheat Stretch Blow Molding Machine
Offer includes the following:
– Preform dumper
– Preform hopper
– Preform elevator
– Preform orienter
– Preform feed rails
Condition- Very good to excellent- well maintained- very low operating hours- can be inspected dry cycling
-
Sterling Dual 5 Pound Accumulator Head Blow Molding Machine
Add to cartSterling Dual 5 Pound Accumulator Head Blow Molding Machine
Sterling Dual 5 Pound Accumulator Head Blow Molding Machine
– Year of manufacture- 1994
– Serial number.- 09789
– Head configuration- dual 5 pound heads
– Center to center distances between head dies- 18 1/2¨
– Extruder horse power.- 100 HP
– Hydraulic unit brand- Rexroth
– Electric specifications- 460 volts/3 phase/60 Hz
– Control- Barber Colman PLC
– Condition- Good
-
Sterling Dual 8 Pound Accumulator Head Blow Molding Machine
Add to cartSterling Dual 8 Pound Accumulator Head Blow Molding Machine
Sterling Dual 8 Pound Accumulator Head Blow Molding Machine
– Year of manufacture- 1987– Head configuration- dual 8 pound heads– Center to center distances between head dies- 26 1/2¨– Extruder horse power.- 150– Hydraulic unit brand- Rexroth– Electric specifications- 460 volts/3 phase/60 Hz– Control- Eurotherm (Barber Colman) PLC– Condition- GoodAdditional machines available at attractive prices:– (1) Maguire Weigh Scale Blender with vacuum pump and vacuum hoppers– (1) Cumberland 40 Horse Power Grinder with all the pipes, dust collector and storage bin– (1) Una-Dyn vacuum pump -
Sterling Model SE350D Dual 5 Pound Accumulator Head Blow Molding Machine
Add to cartSterling Model SE350D Dual 5 Pound Accumulator Head Blow Molding Machine
Sterling Model SE350D Dual 5 Pound Accumulator Head Blow Molding Machine
Year of manufacture- 1997
Head configuration- dual 5 pound heads with 21″ center to center distances between heads
Maximum head tooling diameter- 8″
Extruder diameter- 3 1/2”
Extruder horse power- 125
Clamp force- 65 tons
Clear platen dimensions- 42″ width- 36″ height
Condition- Good- well maintained- can be inspected in operation
-
Sterling Model SS-40 Dual 15 Pound Accumulator Head Blow Molding Machine
Add to cartSterling Model SS-40 Dual 15 Pound Accumulator Head Blow Molding Machine
Sterling Model SS-40 Dual 15 Pound Accumulator Head Blow Molding Machine
Serial number- 91029
Head configuration- dual 15 pound heads with 25.25″ center to center distances between heads
Shot size- 15 pounds per head
Extruder diameter- 4 1/2”
Extruder L:D ratio- 24:1
Extruder horse power- 200
Clamp force- 120 tons
Maximum clamp open daylight- 56”
Machine includes the following:
-Automatic part take out
-Bottom blow stand
Controls- Barber Coleman Maco 6500 controller
Condition- Good- well maintained- can be inspected in operation
-
Uniloy Milacron Model HSM 10/D Continuous Extrusion Blow Molding Machine
Add to cartUniloy Milacron Model HSM 10/D Continuous Extrusion Blow Molding Machine
– Head configuration- dual parison head with 300 mm distance between centers of die heads
– Maximum die diameter- 140 mm
– Press configuration- dual clamp
-
Uniloy Model 250 R1 (6) Head Blow Molding Machine
Add to cartUniloy Model 250 R1 (6) Head Blow Molding Machine
Shot capacity- 450 gramsExtruder output- HDPE, 250 pounds per hourHead configuration- 6 head manifoldOffer includes the following:Drop chuteIndexing take out systemUniloy de tabber/spin trimmerControls- RelayCondition- Very good, can be inspected in operation in Pittsburg, PA area (video of the machine in operation available) -
Uniloy Model 350 R2 (4) Head Reciprocating Screw Blow Molding Machine
Add to cartUniloy Model 350 R2 (4) Head Reciprocating Screw Blow Molding Machine
Uniloy Model 350 R2 (4) Head Reciprocating Screw Blow Molding Machine
– Head configuration- 4 heads with 8” center distances between heads (head has tooling installed to make one gallon industrial round bottles)
– Machine is perfect for producing 1 gallon dairy, water, and industrial round bottles and smaller containers
– Condition- Good- can be inspected dry cycling- machine is immediately available
-
Uniloy Model 350 R2 (4) Head Reciprocating Screw Blow Molding Machine
Add to cartUniloy Model 350 R2 (4) Head Reciprocating Screw Blow Molding Machine
Rotac clamp closing systemExtruder diameter- 3 1/2”Please note- one gallon dairy molds are available at an additional chargeControls- Relay controlsCondition- GoodAvailability- Immediate -
Uniloy Model 350 R2 (6) Head Reciprocating Screw Blow Molding Machine
Add to cartUniloy Model 350 R2 (6) Head Reciprocating Screw Blow Molding Machine
Uniloy Model 350 R2 (6) Head Reciprocating Screw Blow Molding Machine
Head configuration- 4 heads with 8″ center to center distances between headsDual rotac clamp closing systemExtruder diameter- 3 1/2”Extruder horse power- 125 -
Uniloy Model 350 R2 (8) Head Reciprocating Screw Blow Molding Machine
Add to cartUniloy Model 350 R2 (8) Head Reciprocating Screw Blow Molding Machine
Uniloy Model 350 R2 (8) Head Reciprocating Screw Blow Molding Machine
Serial number- 4417
Head configuration- 8 heads with 6 1/8” center to center distances between dies
Extruder diameter- 3 1/2”
Nominal shot size- 900 grams
Clamp force- 90 tons
Machine has been rebuilt
Offer includes the following:
-Uniloy Cooling Bed
-Uniloy Trimming Machine
-Controls- New Direct Logic Model 205 PLC
Condition- Very good
-
Uniloy Model 350 R2 (8) Head Reciprocating Screw Blow Molding Machine
Add to cartUniloy Model 350 R2 (8) Head Reciprocating Screw Blow Molding Machine
Serial number- 3442Head configuration- 8 heads with 6 1’8″ center to center distances between headsNumber of tie bars- 6Dual rotac clamp closing systemOffer includes the following:Resin receiver and hopperUniloy Cooling BedUniloy Model 10041 Impact Trimming MachineLeak detector installed in Trimming MachineTrim tooling for half gallon dairy bottlesHead tooling for half gallon dairy bottlesAvailability- ImmediateControls- Allen-Bradley Model Compact Logix PLC (installed less than 2 years ago)Condition- Very good- the machine ran until about late 2021- machine was recently upgraded with new PLC, clamp rebuild, trimming machine improvements, etc. at a cost of over US $120,000- can be inspected in storage in Harvey, Louisiana -
Uniloy Model 350 R3 (6) Head Reciprocating Screw Blow Molding Machine
Add to cartUniloy Model 350 R3 (6) Head Reciprocating Screw Blow Molding Machine
Uniloy Model 350 R3 (6) Head Reciprocating Screw Blow Molding Machine
Head configuration- 6 heads with 10 1/8” center distances between heads
Heads are programmable
Extruder diameter- 3 1/2″
Extruder horse power- 125
Nominal shot size- 1100 grams
Clamp force- 90 tons
Machine is equipped as follows:
– Air cooled barrel
– AC variable frequency drive
– Machine has side shift capability
– Machine has parison programming
Offer includes the following:
– Uniloy Cooling Bed
– Uniloy Model 10041 Trimming Machine with Leak Detector
Condition- Used
-
Uniloy Model IBS 189-3S Injection Blow Molding Machine
Add to cartUniloy Model IBS 189-3S Injection Blow Molding Machine
Uniloy Model IBS 189-3S Injection Blow Molding Machine
Year of manufacture- 2010
Blow clamp tonnage- 18.8
Injection clamp tonnage- 180
Maximum daylight- 5”
Distance between tie bars- 48”
Mold stack height- 10”
Maximum die set width- 45”
Standard trigger bar- 38.9”
Swing radius- 31.24″
Screw diameter/L:D ratio- 3”/25:1
Extruder horse power- 125
Maximum shot size- 390 grams
Offer includes the following:
Controller- B&R PLC
Condition- Very good- can be inspected in operation- 2 machines available
-
Hesta Graham Model HLD 700-134 Blow Molding Machine
Add to cartHesta Graham Model HLD 700-134 Blow Molding Machine
Year 2003
Dual sided
Low operating hours
In machine trimming capability
