Featured Products
-
Sidel Model SBO 12 PET Reheat Blow Molding Machine
Add to cart -
Aoki Model SBIII-350LL-40 PET One Step Stretch Blow Molding Machine
Add to cartAoki Model SBIII-350LL-40 PET One Step Stretch Blow Molding Machine
Excellent Condition
Less than 200 operating hours
-
Sidel Model SBO 1 PET Stretch Blow Molding Machine
Add to cart -
Uniloy Model 350 R2 (8) Head Reciprocating Screw Blow Molding Machine
Add to cartUniloy Model 350 R2 (8) Head Reciprocating Screw Blow Molding Machine
– 8 head
– Trim tooling for 1/2 gallon dairy bottles
-
Bekum Model H-121D Dual Sided Continuous Extrusion Blow Molding Machine
Add to cart -
Sale!
Sterling Single 20 Pound Accumulator Head Blow Molding Machine
Add to cartSterling Single 20 Pound Accumulator Head Blow Molding Machine
Well Maintained
In operation and Immediately Available
-
2013 Pearson Model BF30-BIFQ Bliss Case Former
Add to cart2013 Pearson Model BF30-BIFQ Bliss Case Former
Currently running the following Bliss Case dimensions http://pearsonpkg.com/products/bliss-former-bf30
http://pearsonpkg.com/products/bliss-former-bf30 -
Cumberland Model 2036 (60) Horse Power Granulator
Add to cart
CALL US – WE ARE FLUENT IN SPANISH! LLÁMANOS!
Recent Products
Conair Franklin Model FL 10
Add to cart
Conair Franklin Model FL 10
Conair Franklin Model FL 10
Receiver diameter- 10”
Receiver volume in cubic feet- .028
Material vacuum line size – 2″ ports
Voltage- 24
Cleaning and Testing Included
Conair Franklin Model FL 10
Add to cart
Conair Franklin Model FL 10
Conair Franklin Model FL 10
Receiver diameter- 10”
Receiver volume in cubic feet- .028
Material vacuum line size – 2″ ports
Voltage- 24
AIS Semi Automatic Bagging Machine
Add to cart
AIS Semi Automatic Bagging Machine
AIS Semi Automatic Bagging Machine
Machine equipped with round bottle staggering feature
Machine was last bagging one gallon industrial round bottles
Condition- Good- can be inspected in storage in Alabama
Sidel Cermex Model TSP3-SDI-CLP BW Bundler/Packer
Add to cart
Sidel Cermex Model TSP3-SDI-CLP BW Bundler/Packer
Sidel Cermex Model TSP3-SDI-CLP BW Bundler/Packer
Maximum speed- 60 cycles per minute
Minimum speed- 30 cycles per minute
Very flexible system- can run the following combinations- Tray+Film/ Pad+Film/ U-Board+Film/Film Only
Can run many different arrays/formats
Includes Tray Former and Shrink Tunnel- complete machine
Condition- Very good- very low operating hours
2012 Husky Model HyPET 400 HPP 4.0 P120/120 EE 140 400 Ton Preform injection Molding Machine
Add to cart
2012 Husky Model HyPET 400 HPP 4.0 P120/120 EE 140 400 Ton Preform injection Molding Machine
In Operation
Very Low Operating Hours
Equipped with High-Performance Package
Soft Drop parts handling system and conveyor
Rapid Model GK 640- K- KU Granulator
Add to cart
Rapid Model GK 640- K- KU Granulator
Rapid Model GK 640- K- KU Granulator
Cutting chamber- 12” x 24”
Cutting circle diameter- 12”
Rotor type- tangential
Airveyor discharge- 6”
Includes controls
Condition – Very good
Cincinnati Milacron Model T800-90G-D10C Dual 10 Pound Accumulator Head Blow Molding Machine
Read more
Cincinnati Milacron Model T800-90G-D10C Dual 10 Pound Accumulator Head Blow Molding Machine
Cincinnati Milacron Model T800-90G-D10C Dual 10 Pound Accumulator Head Blow Molding Machine
Maximum head tooling diameter- 12”
Shot size- 10 pounds per head
Extruder diameter/L:D ratio- 90 mm grooved feed throat/28:1
Automatic part take out
Controls- Camac 486 Controller
Condition- Good
Uniloy Milacron Model T-2000-120 G-D25C Dual 25 Pound Accumulator Head Blow Molding Machine
Read more
Uniloy Milacron Model T-2000-120 G-D25C Dual 25 Pound Accumulator Head Blow Molding Machine
Uniloy Milacron Model T-2000-120 G-D25C Dual 25 Pound Accumulator Head Blow Molding Machine
Extruder diameter/L:D ratio- 120 mm/28:1
Extruder horse power– 250Clamp force- 220 tons
Automatic part take out
Controls- Uniloy Mosaic PLC
Condition- Very good- well maintained
Cincinnati Milacron Model T3000W-D150S-D35C Dual 35 Pound Accumulator Head Blow Molding Machine
Read more
Cincinnati Milacron Model T3000W-D150S-D35C Dual 35 Pound Accumulator Head Blow Molding Machine
Cincinnati Milacron Model T3000W-D150S-D35C Dual 35 Pound Accumulator Head Blow Molding Machine
Extruder horse power- 300 each
Plasticizing capacity- 1400 pounds per hour per extruder
Maximum head tooling diameter- 18”
Controls- Camac 486
Great Condition
Dyco Automatic Bagging Machine
Add to cart
Dyco Automatic Bagging Machine
Dyco Automatic Bagging Machine
Set up to bag one gallon and half gallon dairy/juice bottles
Includes Dyco Stacking System
Condition- Very good
Dyco Automatic Bagging Machine
Add to cart
Dyco Automatic Bagging Machine
Dyco Automatic Bagging Machine
Dual entry machine
Set up to bag one gallon and half gallon dairy/juice bottles
Includes Dyco Stacking System
Condition- Very good
Lectro Engineering Model 720 Vertical Spin Trimming Machine
Add to cart
Lectro Engineering Model 720 Vertical Spin Trimming Machine
Lectro Engineering Model 720 Vertical Spin Trimming Machine
Serial number- 5688
Electrical specifications- 120 volt/1 phase/60 Hz
Condition- Good
Custom Metal Designs Semi Automatic Bagging Machine
Add to cart
Custom Metal Designs Semi Automatic Bagging Machine
Custom Metal Designs Semi Automatic Bagging Machine
Single entry configuration
Controls- Allen Bradley PLC
Condition- Good
Maguire Controller
Read more
Maguire Controller
Maguire Controller
Maguire controllers calibrated, with current 12 software
Condition -Great!
2000 Davis-Standard/Sterling Controls
Add to cart
2000 Davis-Standard/Sterling Controls
2000 Davis-Standard/Sterling Controls
Sequencing and heat controls
Barber Colman Model Maco 6500 PLC with 1200 point parison programming
Condition- Good
2000 Davis-Standard/Sterling Part Take Out System
Add to cart
2000 Davis-Standard/Sterling Part Take Out System
2000 Davis-Standard/Sterling Part Take Out System
(2) available
Manufacturer- HBE Machine (for Davis-Standard)
Condition- Good
2000 Davis-Standard/Sterling Hydraulic Power Packs
Add to cart
2000 Davis-Standard/Sterling Hydraulic Power Packs
2000 Davis-Standard/Sterling Hydraulic Power Packs
(2) available
Horse power- 60
Platform mounted
Includes accumulator tanks
Condition- Good
2000 Davis-Standard/Sterling Hydraulic Clamps
Add to cart
2000 Davis-Standard/Sterling Hydraulic Clamps
2000 Davis-Standard/Sterling Hydraulic Clamps
(2) available
Platen dimensions- 60” x 96”
Minimum/maximum daylight- 26”/76”
Clamp force- 180 tons
Number of tie bars- 3 (8” diameter)
Condition- Good
2000 Davis-Standard/Sterling Extruder with Gear Boxes
Add to cart
2000 Davis-Standard/Sterling Extruder with Gear Boxes
2000 Davis-Standard/Sterling Extruder with Gear Boxes
(2) available
Screw diameter- 6”
Includes heater bands
Condition- Good
2000 Davis-Standard/Sterling 50 Pound Accumulator Head
Add to cart
2000 Davis-Standard/Sterling 50 Pound Accumulator Head
2000 Davis-Standard/Sterling 50 Pound Accumulator Head
Minimum/maximum tooling diameter- 4 1/2”/24″
Includes heater bands
Condition- Good
A.O. Smith – Peabody TecTank Silo
Read more
A.O. Smith – Peabody TecTank Silo
A.O. Smith – Peabody TecTank Silo
Capacity – 5690 cubic feet
Diameter = 12 ft, Height = 60 ft
Compacted Density 35 PCF
Condition – Great
Foremost Surge Bin
Add to cart
Nelmor 16 x 20 (25 HP) Granulator
Add to cart
Nelmor 16 x 20 (25 HP) Granulator
Nelmor 16 x 20 (25 HP) Granulator
Tangential rotor
Throat: 16″ x 20″
3 knife
2 bed knives
25 horse power
Push button controls
Quick disconnect
On casters
Airveyor- 4” discharge
Condition: Great
Includes: clean, paint and test the machine, sharpen knives, check the electrical controls.
Cumberland Model 1426 Granulator
Add to cart
Cumberland Model 1426 Granulator
Cumberland Model 1426 Granulator
100 Hp
Throat Size: 14″ x 26″
Cutting Circle Diameter: 16.5″
Throughput: up to 1200 lbs/hr
Airveyor Discharge, Airveyor Base (fork lift)
2 Bed Knives, 3 Rotor Knives
Electrical Components: NEMA 12 with safety interlocks
Condition: Great
Includes: clean, paint and test the machine, sharpen knives, check the electrical controls
Bridgeport Model Discovery 308 CNC
Add to cart
Bridgeport Model Discovery 308 CNC
Bridgeport Model Discovery 308 CNC
Date of manufacture- 1992
Maximum table load- 750 pounds
“X” axis travel- 17.7”
“Y” axis travel- 12.2”
“Z” axis travel- 16.1”
Spindle speeds- 0 to 4,000 rpm
Spindle taper- BT 30
Tool changer capacity- 8 stations
Rating of largest motor- 15 amps
Condition- Very good
Walker-Turner Model 1100 Drill Press
Add to cart
Walker-Turner Model 1100 Drill Press
Walker-Turner Model 1100 Drill Press
Serial number- 11-3684
Table size- 18” x 17 1/4″
Condition- Good
DoALL Model D-25150 Drill Press
Add to cart
DoALL Model D-25150 Drill Press
DoALL Model D-25150 Drill Press
Table size- 21” x 17 1/4″
Horse power- 1 3/4″
Condition- Good
Clausing Model 2277 Drill Press
Add to cart
Clausing Model 2277 Drill Press
Clausing Model 2277 Drill Press
Table size- 18” x 15 1/2″
Horse power- 1 1/2
Condition- Good
Powermatic Model 1200 Drill Press
Add to cart
Powermatic Model 1200 Drill Press
Powermatic Model 1200 Drill Press
Serial number 920V1207
Table size- 40” x 24″
Condition- Good
Wilton Tradesman Model 8201 Band Saw
Add to cart
Wilton Tradesman Model 8201 Band Saw
Wilton Tradesman Model 8201 Band Saw
8 speeds
One horse power motor
Condition- Good
Sajo Model VF 54 G Vertical Milling Machine
Add to cart
Sajo Model VF 54 G Vertical Milling Machine
Sajo Model VF 54 G Vertical Milling Machine
Includes Getty Pacesetter 2 Tracer System
Condition- Good
Conair Surge Bin
Add to cart
Foremost Surge Bin
Add to cart
Foremost Surge Bin
Add to cart
Munters- Cargocaire Model HCD-600-EA Dehumidifier
Add to cart
Munters- Cargocaire Model HCD-600-EA Dehumidifier
Munters– Cargocaire Model HCD-600-EA Dehumidifier
Year: 1996
CFM- 600
Serial number- 2083
Electrical requirements- 460/3/60
Condition- Good
2 available:
Both were running with a Husky LX300 Injection Molding Machine used for the production of PET preforms.
Zecchetti Model Row by Row (RBR) Palletizer
Add to cart
Zecchetti Model Row by Row (RBR) Palletizer
Zecchetti Model Row by Row (RBR) Palletizer
Year: 2012
Includes 4 lane Table Top Conveyor (TTC) in feed with continuous motion divider
Nominal speed- 10,800 bottles per hour
Load heights ups to 110”
Includes automated slip sheet and top frame insertion system
System can handle 40”x48” and 44”x56” pallets
System includes the following:
Strapping Machine
Stretch Wrapping Machine
Full pallet exit conveyor
Condition- Excellent- very low operating hours
Kreyenborg Model K-SWE-180-4K/RS Dual Bolt Continuous Screen Changer
Read more
Kreyenborg Model K-SWE-180-4K/RS Dual Bolt Continuous Screen Changer
Kreyenborg Model K-SWE-180-4K/RS Dual Bolt Continuous Screen Changer
Year of manufacture- 2008
Capacity – rated at 3,000 pounds per hour of polyethylene
Machine features:
– 200 mm breaker plates
– 4 Kw hydraulic pumping system
– Body and adapter are electrically heated
– Includes automatic back flush capability
Condition- Good- can be inspected in New Jersey
Dyco Semi Automatic Bagging Machine
Add to cart
Dyco Semi Automatic Bagging Machine
Dyco Semi Automatic Bagging Machine
Model number- 2030 Single Tier Packer
Serial number- 20-611 0893
Single entry configuration
Controls- Allen Bradley PLC
Condition- Good- can be inspected in storage in Alabama
Custom Metal Designs Semi Automatic Bagging Machine
Add to cart
Custom Metal Designs Semi Automatic Bagging Machine
Custom Metal Designs Semi Automatic Bagging Machine
Model number-4845-7-00
Serial number- SB1042-SSP-RL
Machine was bagging one gallon dairy bottles
Condition- Good- can be inspected in storage in Missouri
1/2 Gallon Uniloy Milk Jug Molds
Read more
Molds (32 oz.)
Read more
Ball and Jewell Model BP1012 (10) Horse Power Granulator
Add to cart
Ball and Jewell Model BP1012 (10) Horse Power Granulator
Ball and Jewell Model BP1012 (10) Horse Power Granulator
Rotor type- open rotor
Discharge- airveyor
Condition- Very good
Additional options available
5 horse power blower- $1150
Cyclone- 1150
Cyclone stand $695
Surge bin- multiple sizes available pricing $900 to $3500 based on capacity
Filter head assembly with filter bags and clamps- $1350
Uniloy Mayonaise Jug Mold
Read more
New England Model New England Model NEHA-60 Horizontal Adjustable Unscrambler
Add to cart
New England Model New England Model NEHA-60 Horizontal Adjustable Unscrambler
New England Model NEHA-60 Horizontal Adjustable Unscrambler
Year – 2007
Serial number- 2832
Has extended range
Originally set up to unscramble 10, 16.9, and 20 ounce PET bottles
Condition- Very good- can be inspected in storage at our warehouse in Harvey, Louisiana
Sidel Model SBO 10 PET Stretch Blow Molding Machine
Add to cart
Sidel Model SBO 10 PET Stretch Blow Molding Machine
Sidel Model SBO 10 PET Stretch Blow Molding Machine
Production capacity- maximum nominal output:
15,000 bottles per hour
Type mold hangers: GUPM
Condition:Very good- low operating hours- currently installed as an R&D/Training machine- can be inspected in storage
M. Tanner Model VZT-0300 Preform Hopper/Elevator with M. Tanner Model RST-0302 Unscrambler
Add to cart
M. Tanner Model VZT-0300 Preform Hopper/Elevator with M. Tanner Model RST-0302 Unscrambler
M. Tanner Model VZT-0300 Preform Hopper/Elevator with M. Tanner Model RST-0302 Unscrambler
Stainless steel construction
Includes controls
System is complete to store, convey, and orient preforms
Condition- Very good- can be inspected in storage in Harvey, Louisiana
Sleevco Model Model SL-3000 Sleeving Machine
Add to cart
Sleevco Model Model SL-3000 Sleeving Machine
Sleevco Model Model SL-3000 Sleeving Machine
Capacity- approximately 30 to 40 bottles per hour
Currently set up to sleeve round gallons
Condition- Good
Sleevco Model Model SL-1800 Sleeving Machine
Add to cart
Sleevco Model Model SL-1800 Sleeving Machine
Sleevco Model Model SL-1800 Sleeving Machine
Capacity- 30 to 40 bottles per hour
Condition- Very good
Styrotech Model ST-1100 Sleeving Machine
Add to cart
Styrotech Model ST-1100 Sleeving Machine
Styrotech Model ST-1100 Sleeving Machine
Capacity- approximately 30 to 40 bottles per hour
Currently set up to sleeve round gallons
Condition- Good
Uniloy Model R-2000 (6) Head Reciprocating Screw Blow Molding Machine (2 available)
Add to cart
Uniloy Model R-2000 (6) Head Reciprocating Screw Blow Molding Machine (2 available)
Uniloy Model R2000 (6) Head Reciprocating Screw Blow Molding Machine (2 available)
Line includes the following:
Uniloy (6) Lane Cooling Bed
Uniloy Model 10041 Dual Index Trimming Machine (6) Uniloy molds to produce one gallon dairy/water bottles
Plastech Control Systems Model LT2-2 Leak Detector
Controls- Allen-Bradley Model Logix 5561 PLC
Condition- Excellent- less than 7,000 operating hours