Contact us for a quotation! Line 1: 504-362-5183 --- Line 2: 504-513-2884 -- Llámanos hablamos Español!
Showing all 32 results
-
Uniloy Cooling Bed
Add to cartUniloy Cooling Bed
– Current number of lanes- 4
– Dimensions- 118” long x 42 1/4” wide
– Includes controls
– Includes Dyco Automatic Pick and Place System with controls
– Condition- Very good
-
Uniloy Cooling Bed
Add to cartUniloy Cooling Bed
– Current number of lanes- 4
– Dimensions- 116” long x 42 1/4” wide
– Includes (2) cooling fans
– Includes step over platform
– Includes controls
– Condition- Good
-
Uniloy Cooling Bed
Add to cartUniloy Cooling Bed
– Current number of lanes- 4
– Dimensions 158” long x 42 1/4” wide
– Includes step over platform
– Includes controls
– Condition- Good
-
Uniloy Model 2014 (2) Head Reciprocating Screw Blow Molding Machine
Add to cartUniloy Model 2014 (2) Head Reciprocating Screw Blow Molding Machine
Uniloy Model 2014 (2) Head Reciprocating Screw Blow Molding Machine
Machine is perfect to produce one gallon and smaller size bottles
Head configuration- 2 heads with 8” distance between die centers
Machine has been upgraded with the following items:
– Air cooled barrel
– Baldor Model H2 AC Variable Speed drive
Offer includes the following:
– Uniloy (2) Lane Cooling Bed
– 20 point parison programmer
-
Uniloy Model 250 R1 (6) Head Blow Molding Machine
Add to cartUniloy Model 250 R1 (6) Head Blow Molding Machine
Shot capacity- 450 gramsExtruder output- HDPE, 250 pounds per hourHead configuration- 6 head manifoldOffer includes the following:Drop chuteIndexing take out systemUniloy de tabber/spin trimmerControls- RelayCondition- Very good, can be inspected in operation in Pittsburg, PA area (video of the machine in operation available) -
Uniloy Model 350 R2 (4) Head Reciprocating Screw Blow Molding Machine
Add to cartUniloy Model 350 R2 (4) Head Reciprocating Screw Blow Molding Machine
Uniloy Model 350 R2 (4) Head Reciprocating Screw Blow Molding Machine
– Head configuration- 4 heads with 8” center distances between heads (head has tooling installed to make one gallon industrial round bottles)
– Machine is perfect for producing 1 gallon dairy, water, and industrial round bottles and smaller containers
– Condition- Good- can be inspected dry cycling- machine is immediately available
-
Uniloy Model 350 R2 (4) Head Reciprocating Screw Blow Molding Machine
Add to cartUniloy Model 350 R2 (4) Head Reciprocating Screw Blow Molding Machine
Rotac clamp closing systemExtruder diameter- 3 1/2”Please note- one gallon dairy molds are available at an additional chargeControls- Relay controlsCondition- GoodAvailability- Immediate -
Uniloy Model 350 R2 (6) Head Reciprocating Screw Blow Molding Machine
Add to cartUniloy Model 350 R2 (6) Head Reciprocating Screw Blow Molding Machine
Uniloy Model 350 R2 (6) Head Reciprocating Screw Blow Molding Machine
Head configuration- 4 heads with 8″ center to center distances between headsDual rotac clamp closing systemExtruder diameter- 3 1/2”Extruder horse power- 125 -
Uniloy Model 350 R2 (6) Head Reciprocating Screw Blow Molding Machine
Read moreUniloy Model 350 R2 (6) Head Reciprocating Screw Blow Molding Machine
Uniloy Model 350 R2 (6) Head Reciprocating Screw Blow Molding Machine
Head configuration- 6 heads with 8” center distances between heads
Extruder size- 3 1/2 ̈ diameter
Extruder horse power- 125
Nominal shot size- 900 grams
Offer includes the following:
-Uniloy Cooling Bed
-Uniloy Model 10041 Trimming Machine with an AIS Leak Detector
Condition Good
-
Uniloy Model 350 R2 (8) Head Reciprocating Screw Blow Molding Machine
Add to cartUniloy Model 350 R2 (8) Head Reciprocating Screw Blow Molding Machine
Serial number- 3442Head configuration- 8 heads with 6 1’8″ center to center distances between headsNumber of tie bars- 6Dual rotac clamp closing systemOffer includes the following:Resin receiver and hopperUniloy Cooling BedUniloy Model 10041 Impact Trimming MachineLeak detector installed with trim tooling for one gallon dairy bottlesAvailability- ImmediateControls- Relay controlsCondition- Very good- the machine ran until about late 2021, it is still installed where it was in operation -
Uniloy Model 350 R3 (4) Head Blow Molding Machine
Add to cartUniloy Model 350 R3 (4) Head Blow Molding Machine
https://youtube.com/shorts/kwIzSSCTDYU?feature=share
Well Maintained
Immediately Available
https://youtube.com/shorts/kwIzSSCTDYU?feature=share
-
Uniloy Model 2011 (3) Head Blow Molding Machine
Add to cartUniloy Model 2011 (3) Head Blow Molding Machine
Uniloy Model 2011 (3) Head Blow Molding Machine
Machine was completely rebuilt in 2014 including the following:
New Automation Direct Click Koyo PLC
Dura Pulse variable frequency drive
New Uniloy built control panel
New swing arms
New extruder drive motor
New air cooled barrel system
Offer includes the following:
Spin trimming machine
Hopper/loader
Condition- Excellent, rebuilt
-
Uniloy Model UR-100 Reciprocating Screw Blow Molding Machine
Add to cartUniloy Model UR-100 Reciprocating Screw Blow Molding Machine
The machine is currently set up to run (2) bottles per head, arranged neck to neck, so that 24 bottles are produced each cycle.
The offer can includes (2) 24 cavity molds (neck to neck) to produce an 8 ounce (approximately 250 ml) and a 16 ounce (approximately 500 ml) drinkable yogurt bottle
There is another mold available as well.
It has a system to separate the neck of one bottle from the other and a rotary trimmer to finish trimming the bottle so that it emerges ready to fill.
Video Below is of Similar Machine In Operation
-
Rocheleau Model RS-25 (8) Head Reciprocating Screw Blow Molding Machine
Add to cartRocheleau Model RS-25 (8) Head Reciprocating Screw Blow Molding Machine
8 Head with 4″ Center to Center Distances
The machine has been well maintained, is in very good condition, is immediately available
-
Uniloy Model 2016 (3) Head Reciprocating Screw Blow Molding Machine
Add to cartUniloy Model 2016 (3) Head Reciprocating Screw Blow Molding Machine
– Head configuration- 3 heads with 6 1/8″” center to center distances between heads
– Machine is perfect to produce 1/2 gallon and smaller dairy/juice and other type bottles
-
2002 Uniloy Model R-2000 (3) Head Reciprocating Screw Blow Molding Machine
Add to cart2002 Uniloy Model R-2000 (3) Head Reciprocating Screw Blow Molding Machine
3 heads with 16” center to center distances between heads
Side shift capability to make bottles with an offset center neck finish
Includes Uniloy Model 10041 trimming machine with Siemens Model S7-200 PLC (
(3) Uniloy Model 90254 (2 1/2) gallon molds
-
1999 Rocheleau Model RS-25 (2) Head Blow Molding Machine
Add to cart1999 Rocheleau Model RS-25 (2) Head Blow Molding Machine
– 12″ Centers
– Perfect for producing 1 gallon/4 liter water, dairy and industrial round bottles and smaller containers
-
2002 Uniloy Model R2000 (4) Head Reciprocating Screw Blow Molding Machine
Add to cart2002 Uniloy Model R2000 (4) Head Reciprocating Screw Blow Molding Machine
Low Operating Hours
(4) Head on 12″ Centers
Side Shift Capability to run an F- Style Bottle
Includes Uniloy Model 10042 Dual Index Trimmer
Can be Inspected Dry Cycling
-
Sale
Liberty Model RS-4000 (6) Head Reciprocating Screw Blow Molding Machine
Add to cartLiberty Model RS-4000 (6) Head Reciprocating Screw Blow Molding Machine
Well Maintained and Great Value
The machine has the capability to produce One Gallon Bottles, such as Dairy, Water, Industrial Rounds, as well as smaller bottles.
-
Uniloy Model 350 R4 (5) Head Reciprocating Screw Blow Molding Machine
Add to cartUniloy Model 350 R4 (5) Head Reciprocating Screw Blow Molding Machine
Uniloy Model 350 R4 (5) Head Reciprocating Screw Blow Molding Machine (Complete Line)
Serial number- 4085
Machine has side shift capability that enables the
machine to produce off set center neck finishes
Head configuration- 5 heads with 8” center to center
distances between heads
Heads are programmable
Extruder size- 3 1/2 “
Extruder motor horse power- 125
Shot size- nominal 1600 grams
Clamp dimensions- 48” wide x 21 3/4” highMachine has been upgraded as follows:
– Air cooled barrel installed
– G.E. Model AF-300E$ AC variable frequency drive installed
– New Instrucon Model Maco Compact PLC installed
– One new program cylinder installed
– Hydraulic hoses changed
– New open/close valve installed
– All clamp bearings changed
– New PLC installed on Cooling Bed
– New Allen Bradley MicroLogix PLC installed on Trimming Machine
– New Plastech Leak Detector installed on Trimming Machine
– Line includes the following:
– Uniloy Cooling Bed
– Uniloy Model 10042 Trimming Machine
Controls- New Instrucon Model Maco Compact PLC
Condition- Very good- equipment can be inspected dry cycling -
Uniloy Model 350 R2 (4) Head Reciprocating Screw Blow Molding Machine
Add to cartUniloy Model 350 R2 (4) Head Reciprocating Screw Blow Molding Machine
Complete Line
Perfect for producing 1 Gallon Water, Dairy, Juice, Industrial Round Bottles, and Smaller Containers
