Showing 65–96 of 204 results
-
Krones Model Contiform S20 PET Re-heat Stretch Blow Molding Machine
Add to cartKrones Model Contiform S20 PET Re-heat Stretch Blow Molding Machine
Well Maintained
Oven upgraded to C3 design
Half- liter molds available with machine purchase
-
Krones Model VARIOPAC PRO TFS-4-DS Tray Shrink Packer
Add to cartKrones Model VARIOPAC PRO TFS-4-DS Tray Shrink Packer
Krones Model VARIOPAC PRO TFS-4-DS Tray Shrink PackerYear- 2021Model- VARIOPAC Pro TFS-4-DSSpeed- approximately 45 cases per minuteContainer volume range- up to 6 lanesCase formations- 4 x 3, 3 x 2, and 2 packs x 2 packsContainer volumes- 12 ounce to 20 ounceCurrent products- Energy drinks, tea and juiceCondition- Very good to excellent, less than 1200 hours, installed and can be inspected in production -
Krupp Corpoplast Model Blomax 6 PET Reheat Stretch Blow Molding Machine
Add to cartKrupp Corpoplast Model Blomax 6 PET Reheat Stretch Blow Molding Machine
Krupp Corpoplast Model Blomax 6 PET Reheat Stretch Blow Molding Machine
Year of manufacture- 1998
Operating speed- approximately 12,000 per hour
Offer includes the following:
Preform dumper
Preform hopper
Preform elevator
Preform orienter
Preform feed rails
Set of 1.5 liter molds
Condition- Good- can be inspected dry cycling
-
Lectro Engineering Model 2001D Dual Hand Bottle Takeaway/De-Tabbing System
Add to cartLectro Engineering Model 2001D Dual Hand Bottle Takeaway/De-Tabbing System
Lectro Engineering Model 2001D Dual Hand Bottle Takeaway/De-Tabbing System
Year-2014
Serial number- 6221
Model number- 2001D
Controls- Allen Bradley
Condition- Used
-
Lectro Engineering Model 720 Vertical Spin Trimming Machine
Add to cartLectro Engineering Model 720 Vertical Spin Trimming Machine
Lectro Engineering Model 720 Vertical Spin Trimming Machine
Serial number- 5688
Electrical specifications- 120 volt/1 phase/60 Hz
Condition- Good
-
Lectro Engineering Model 732R/30 Vertical Spin Trimming Machine
Add to cartLectro Engineering Model 732R/30 Vertical Spin Trimming Machine
Lectro Engineering Model 732R/30 Vertical Spin Trimming Machine
Containers per minute- 120 (depending on size)
Min/Max Neck Size- 1″ – 4″ (25-102 mm)
Min/Max Diameter- 1.5″ – 7″ (38-178 mm)
Min/Max height- 6″-11″ (152- 280 mm)
Condition- Used, very good
-
Liberty Cooling Bed
Add to cartLiberty Cooling Bed
Liberty Cooling Bed
Current number of lanes- 6
Width- 49 1/2” wide
Includes cooling blowers
Condition- Good
-
M.C Molds Model DST 2000 Spin Trimming Machine
Add to cartM.C Molds Model DST 2000 Spin Trimming Machine
M.C Molds Model DST 2000 Spin Trimming MachineModel- DST 2000Condition, used, very good -
Magic Model IBL5-8-D Continuous Extrusion Blow Molding Machine
Add to cartMagic Model IBL5-8-D Continuous Extrusion Blow Molding Machine
Magic Model IBL5-8-D Continuous Extrusion Blow Molding Machine
Model- IBL5-8-D
Year of manufacture- 2010
Maximun container size- 8 liters (approximately 2.1 gallons)
Bead configuration- Dual parison has with 220 mm distance between head centers
Maximum head die diameter- 135 mm
In machine trimming capability
Maximum mold width- 540 mm
Maximum mold height- 410
Maximum mold depth- 2 x 130 mm
Opening travel- 250 mm
Mold closing force- 15.3 tons
Total weight of machine- 13,000 kilograms
Extruder diameter- 100 mm
Power specifications- 460 volts- 3 phase- 60 cycles
Condition- Used, in good operating condition
-
Magic Model VF 146/8 PET Injection Stretch Blow Molding Machine
Add to cartMagic Model VF 146/8 PET Injection Stretch Blow Molding Machine
– Screw diameter- 54 mm
– Injection capacity- 354 cc
– Type controller- Gefran
-
MC Molds Model DST-2000 Spin Trimming Machine
Add to cartMC Molds Model DST-2000 Spin Trimming Machine
MC Molds Model DST-2000 Spin Trimming Machine
Model number- DST-2000
Condition- good
-
Nissei ASB Model 650NHII PET Stretch Blow Molding Machine
Add to cartNissei ASB Model 650NHII PET Stretch Blow Molding Machine
Nissei ASB Model 650NHII PET Stretch Blow Molding Machine
Very good condition
Well maintained
Offer Includes the following:
O’Connell Machine bottle take out system
Una-Dyn 1200 Pound insulated hopper
Una-Dyn Model DHD-6 GF Material Dryer
Sterlco Thermolator
-
Nissei Model ASB-50MB One Step Stretch Blow Molding Machine
Add to cartNissei Model ASB-50MB One Step Stretch Blow Molding Machine
– Small high-pressure air compressor
– 3 cavity injection and blow mold to make a oval Boston Round bottles are available at an additional price
-
Nissei Model PF3-1BLL PET One Step Stretch Blow Molding Machine
Add to cartNissei Model PF3-1BLL PET One Step Stretch Blow Molding Machine
Machine Can be inspected in Operation
-
Plastech Control Systems Leak Detector
Add to cartPlastech Control Systems Leak Detector
Plastech Control Systems Leak Detector
Model- LTU5000
Type- Linear
Number of heads- dual head
Includes the following:
Table top conveyor- belt is 3 3/8″ wide x 100 long- conveyor speed adjustable
Sidel rails are adjustable
Heads are vertically adjustable
Unit is on casters so it is portable
Condition- Used, appress to be lightly used in excellent condition
-
RLS Enterprises Flame Treater
Add to cartRLS Enterprises Flame Treater
RLS Enterprises Flame Treater
Serial number- 2063
Year- 2015
Designed to treat squat size or liter bottle
Condition- Very good
-
Siapi Model EA7/4 PET Reheat Stretch Blow Molding Machine with Molds Complete Line
Add to cartSiapi Model EA7/4 PET Reheat Stretch Blow Molding Machine with Molds Complete Line
Siapi Model EA7/4 PET Reheat Stretch Blow Molding Machine with Molds (complete line to produce (1) gallon bottles with handle)
– Year of construction- 2011
– Upstream and downstream Equipment
– Number of cavities- 4
– Nominal production rate- 70 bottles per minute/4,200 bottles per hour
– Machine was running a (1) gallon bottle
– Condition- Very good- well maintained
-
Siapi Model EASP20.200 PET Two Step Stretch Blow Molding Machine
Add to cartSiapi Model EASP20.200 PET Two Step Stretch Blow Molding Machine
Well Maintained
Currently Set up to Run 1- Gallon Square Bottle with 43mm neck finish
Includes Preform Handling Equipment
Molds Available with Purchase of the Machine
-
Sidel Model Combi BD EvoBLOW SBO 18 Matrix PET Reheat Stretch Blow Molding Machine and Sidel EVODECO Labeling Machine
Add to cartSidel Model Combi BD EvoBLOW SBO 18 Matrix PET Reheat Stretch Blow Molding Machine and Sidel EVODECO Labeling Machine
Sidel Model Combi BD EvoBLOW SBO 18 Matrix PET Reheat Stretch Blow Molding Machine and Sidel EVODECO Labeling Machine
-
Sidel Model EVODECO 27T/1 R 1080 RF 126 Labeling Machine
Add to cartSidel Model EVODECO 27T/1 R 1080 RF 126 Labeling Machine
Sidel Model EVODECO 27T/1 R 1080 RF 126 Labeling Machine
Year of manufacture- 2019
Type labeler- wrap around roll fed
Label material- plastic or paper
Nominal production speed- 42,000 per hour
Number of heads- 27
Carousel diameter- 1080 mm
Pitch- 125 mm
Machine includes the following:
– Bottle pressurizing system
– Automatic regulation of machine speed according to line conditions
– Fume extractor
– Laser coder
NOTE: Labeler is currently part of a Combi BlowDeco system to blow and label PET bottles
Condition- Like New- lightly used
-
Sidel Model SBO 10 PET Stretch Blow Molding Machine
Add to cartSidel Model SBO 10 PET Stretch Blow Molding Machine
– Series I machine
– Number of cavities- 10
– Capable of producing up to a 3-liter bottle
– Nominal production capacity- 12,000 bottles per hour
-
Sidel Model SBO 10 PET Stretch Blow Molding Machine
Add to cartSidel Model SBO 10 PET Stretch Blow Molding Machine
Sidel Model SBO 10 PET Stretch Blow Molding Machine
– year 2002
– Series 2 version
– Number of cavities- 10
– Production capacity- maximum nominal output- 15,000 bottles per hour
– Type mold hangers- GUPM
– Preform external neck diameter- maximum- 43 m.m.
– Preform support ring diameter- maximum- 48.5 m.m.
– Preform length including neck- maximum- 185 m.m.
– Bottle diameter- maximum- 130 m.m.
– Bottle height- maximum- 380 m.m.
– Bottle capacity- maximum- 2.25 liters
– Condition- Very good- low operating hours- currently installed as an R&D/Training machine- can be inspected in storage
-
Sidel Model SBO 14 PET Reheat Stretch Blow Molding Machine
Add to cartSidel Model SBO 14 PET Reheat Stretch Blow Molding Machine
Series Two Plus
In Operation and Well Maintained
Immediatiatley Available
