Showing 65–96 of 175 results
-
Siapi Model EA7/4 PET Reheat Stretch Blow Molding Machine with Molds Complete Line
Add to cartSiapi Model EA7/4 PET Reheat Stretch Blow Molding Machine with Molds Complete Line
Siapi Model EA7/4 PET Reheat Stretch Blow Molding Machine with Molds (complete line to produce (1) gallon bottles with handle)
– Year of construction- 2011
– Upstream and downstream Equipment
– Number of cavities- 4
– Nominal production rate- 70 bottles per minute/4,200 bottles per hour
– Machine was running a (1) gallon bottle
– Condition- Very good- well maintained
-
Siapi Model EASP20.200 PET Two Step Stretch Blow Molding Machine
Add to cartSiapi Model EASP20.200 PET Two Step Stretch Blow Molding Machine
Well Maintained
Currently Set up to Run 1- Gallon Square Bottle with 43mm neck finish
Includes Preform Handling Equipment
Molds Available with Purchase of the Machine
-
Sidel Model Combi BD EvoBLOW SBO 18 Matrix PET Reheat Stretch Blow Molding Machine and Sidel EVODECO Labeling Machine
Add to cartSidel Model Combi BD EvoBLOW SBO 18 Matrix PET Reheat Stretch Blow Molding Machine and Sidel EVODECO Labeling Machine
Sidel Model Combi BD EvoBLOW SBO 18 Matrix PET Reheat Stretch Blow Molding Machine and Sidel EVODECO Labeling Machine
-
Sidel Model EVODECO 27T/1 R 1080 RF 126 Labeling Machine
Add to cartSidel Model EVODECO 27T/1 R 1080 RF 126 Labeling Machine
Sidel Model EVODECO 27T/1 R 1080 RF 126 Labeling Machine
Year of manufacture- 2019
Type labeler- wrap around roll fed
Label material- plastic or paper
Nominal production speed- 42,000 per hour
Number of heads- 27
Carousel diameter- 1080 mm
Pitch- 125 mm
Machine includes the following:
– Bottle pressurizing system
– Automatic regulation of machine speed according to line conditions
– Fume extractor
– Laser coder
NOTE: Labeler is currently part of a Combi BlowDeco system to blow and label PET bottles
Condition- Like New- lightly used
-
Sidel Model SBO 10 PET Stretch Blow Molding Machine
Add to cartSidel Model SBO 10 PET Stretch Blow Molding Machine
– Series I machine
– Number of cavities- 10
– Capable of producing up to a 3-liter bottle
– Nominal production capacity- 12,000 bottles per hour
-
Sidel Model SBO 10 PET Stretch Blow Molding Machine
Add to cartSidel Model SBO 10 PET Stretch Blow Molding Machine
Sidel Model SBO 10 PET Stretch Blow Molding Machine
– year 2002
– Series 2 version
– Number of cavities- 10
– Production capacity- maximum nominal output- 15,000 bottles per hour
– Type mold hangers- GUPM
– Preform external neck diameter- maximum- 43 m.m.
– Preform support ring diameter- maximum- 48.5 m.m.
– Preform length including neck- maximum- 185 m.m.
– Bottle diameter- maximum- 130 m.m.
– Bottle height- maximum- 380 m.m.
– Bottle capacity- maximum- 2.25 liters
– Condition- Very good- low operating hours- currently installed as an R&D/Training machine- can be inspected in storage
-
Sidel Model SBO 14 PET Reheat Stretch Blow Molding Machine
Add to cartSidel Model SBO 14 PET Reheat Stretch Blow Molding Machine
Series Two Plus
In Operation and Well Maintained
Immediatiatley Available
-
Sidel Model SBO 2/3 PET Reheat Stretch Blow Molding Machine
Add to cartSidel Model SBO 2/3 PET Reheat Stretch Blow Molding Machine
Year of manufacture- 2000Number of cavities- 2Nominal production capacity- 2,400 bottles per hourOffer includes the following:Preform dumberPreform hopper/elevatorPreform orienterPreform feed railsTransformerCondition- Good- operated until approximately November 2022 -
Sidel Model SBO 20 Universal PET Reheat Stretch Blow Molding Machine
Read moreSidel Model SBO 20 Universal PET Reheat Stretch Blow Molding Machine
Sidel Model SBO 20 Universal PET Reheat Stretch Blow Molding Machine
– Year- 2006
– Number of cavities- 20
-
Sidel Model SBO 2F PET Reheat Stretch Blow Molding Machine
Add to cartSidel Model SBO 2F PET Reheat Stretch Blow Molding Machine
Year of manufacture- 2000
Number of cavities- 2
Nominal production capacity- 2,400 bottles per hour
Type mold hangers- GUPM
Offer includes the following:
Preform dumber
Preform hopper/elevator
Preform orienter
Preform feed rails
Transformer
Condition- Good- operated until approximately November 2022
-
Sidel Model SBO 6/10 PET Stretch Blow Molding Machine
Read moreSidel Model SBO 6/10 PET Stretch Blow Molding Machine
SBO 6/10 (6 cavities and 10 heating sections)
Two-step blow molding process. This entails a preform being injection molded. The preform is then blown and stretched to specifications.
The Machine is in very good condition.
-
Sidel Model SBO 6/6 PET Reheat Stretch Blow Molding Machine
Add to cartSidel Model SBO 6/6 PET Reheat Stretch Blow Molding Machine
Sidel Model SBO 6/6 PET Reheat Stretch Blow Molding Machine
Year of manufacture- 1996
Number of cavities- 6
Production capacity- approximately 7200 bottles per hour (depending on size and design of bottle)
Type mold hanger- GUPM
Oven type- linear
Maximum bottle diameter- 120 m.m.
Maximum bottle height- 388 m.m.
Maximum neck ring diameter- 51 mm
Maximum internal neck diameter- 34 mm
Maximum preform length- 210 m.m
Number of preforms in oven- 116
– Offer includes the following:
– Preform dumper
– Preform hopper/elevator
– Preform orienter
– Preform feed rails
– Condition- Good, can be inspected in operation in Florida
-
Sidel Model SBO 8 CHP (Universal) PET Reheat Stretch Blow Molding Machine
Add to cartSidel Model SBO 8 CHP (Universal) PET Reheat Stretch Blow Molding Machine
Well maintained, low operating hours
Upgrades
Preferential Heating
-
Sidel Model SBO4R6 PET Reheat Stretch Blow Molding Machine
Add to cartSidel Model SBO4R6 PET Reheat Stretch Blow Molding Machine
Sidel Model SBO4R6 PET Reheat Stretch Blow Molding Machine
Year of manufacture- 1993
Serial number- 184
Number of cavities- 4
Current production- (1) gallon bottles- approximately 1.775 bottles per hour (the smaller the bottle the greater the speed.)
Type of mold hanger- SUPM (this machine is equipped with large mold hangers and can produce a (1) gallon/4 liter bottle or larger
Oven type- Linear
Offer includes the following:
Preform dumper
Preform hopper/elevator
Preform orienter
Preform feed rails
Condition- good recently in operation, in place at the plant
-
Sidel SBO 6 PET Preform Hopper and Elevator
Add to cartSidel SBO 6 PET Preform Hopper and Elevator
Sidel SBO 6 PET Preform Hopper and Elevator
Previously used to store, and elevate PET preformsCondition- UsedWill clean and test prior to shipment -
SIG Corpoplast Model Blomax 14 PET Reheat Stretch Blow Molding Machine
Add to cartSIG Corpoplast Model Blomax 14 PET Reheat Stretch Blow Molding Machine
SIG Corpoplast Model Blomax 14 PET Reheat Stretch Blow Molding Machine
Year of manufacture- 2003
Machine is a Series III
Operating speed- approximately 22,500 per hour
Offer includes the following:
Preform dumper
Preform hopper
Preform elevator
Preform orienter
Preform feed rails
Condition- Good- can be inspected dry cycling
-
SIG Corpoplast Model Blowmax 12 PET Reheat Stretch Blow Molding Machine
Add to cartSIG Corpoplast Model Blowmax 12 PET Reheat Stretch Blow Molding Machine
SIG Corpoplast Model Blowmax 12 PET Reheat Stretch Blow Molding Machine
Offer includes the following:
– Preform dumper
– Preform hopper
– Preform elevator
– Preform orienter
– Preform feed rails
Condition- Very good to excellent- well maintained- very low operating hours- can be inspected dry cycling
-
Sterling Dual 5 Pound Accumulator Head Blow Molding Machine
Add to cartSterling Dual 5 Pound Accumulator Head Blow Molding Machine
Sterling Dual 5 Pound Accumulator Head Blow Molding Machine
– Year of manufacture- 1994
– Serial number.- 09789
– Head configuration- dual 5 pound heads
– Center to center distances between head dies- 18 1/2¨
– Extruder horse power.- 100 HP
– Hydraulic unit brand- Rexroth
– Electric specifications- 460 volts/3 phase/60 Hz
– Control- Barber Colman PLC
– Condition- Good
-
Sterling Dual 8 Pound Accumulator Head Blow Molding Machine
Add to cartSterling Dual 8 Pound Accumulator Head Blow Molding Machine
Sterling Dual 8 Pound Accumulator Head Blow Molding Machine
– Year of manufacture- 1987– Head configuration- dual 8 pound heads– Center to center distances between head dies- 26 1/2¨– Extruder horse power.- 150– Hydraulic unit brand- Rexroth– Electric specifications- 460 volts/3 phase/60 Hz– Control- Eurotherm (Barber Colman) PLC– Condition- GoodAdditional machines available at attractive prices:– (1) Maguire Weigh Scale Blender with vacuum pump and vacuum hoppers– (1) Cumberland 40 Horse Power Grinder with all the pipes, dust collector and storage bin– (1) Una-Dyn vacuum pump -
Sterling Model SE350D Dual 5 Pound Accumulator Head Blow Molding Machine
Add to cartSterling Model SE350D Dual 5 Pound Accumulator Head Blow Molding Machine
Sterling Model SE350D Dual 5 Pound Accumulator Head Blow Molding Machine
Year of manufacture- 1997
Head configuration- dual 5 pound heads with 21″ center to center distances between heads
Maximum head tooling diameter- 8″
Extruder diameter- 3 1/2”
Extruder horse power- 125
Clamp force- 65 tons
Clear platen dimensions- 42″ width- 36″ height
Condition- Good- well maintained- can be inspected in operation
